Shenzhen Xiding Technology Co. Ltd

Model Number: 3d-15012 Brand Name: MT Key Specifications/Special Features: Descriptions:Certificate: SGS, have diameter laser detection kitsUniform wire diameter and no bubble3D printing filamentMaterial: PLA or ABS

Diameter: 1.75 or 3.0mm

Colors: transparent, white, black, red, orange, purple, green, blue, grey, pink, brown, gold, silver, glow in dark, transparent-red, transparent-yellow, transparent-orange, transparent-purple, transparent-green, transparent-blue

Packing: 1kg/spool/polybag/box, 12 boxes/carton

3D printing filament and plastic filament

Production control:

• Before produce extruding filament, we will dry ABS and PLA (within 3 to 5 hours)
• Mix with colors master batch or colors powder, all which certified with RoHS
• Adjust temperature and dragging rate, make filament diameter range at 1.6 to 1.8/2.8 to 3.0mm, roundness ±0.05mm, each spool net weight 1kg ±0.02kg
• We put all filament spool in shelf, different kind in different shelf, all categories arranged orderly

About waste and recycle:

• Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced
• We haven't produced with scrap outlet, rework and recycle material, or dispose, but for quality assurance purpose

Packaging:

• We put each filament/spool on seal PE bag with desiccant, then smaller carton, then out big box
• We also have vacuum heated bag to replace of PE bag, make better avoid moisture

Production quality control:

• We have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable
• Keep each record filament samples sent to customers, build a tracking able document
• When the filament put on shelf longer than half a year, we will dry the filament again